This article extensively investigates the calculations of the compensation factor of the thyristor-controlled series compensator (TCSC), which are used to accurately evaluate the negative impacts of the TCSC on the performance of conventional distance relays. To broadly evaluate the distance protection
performance, the TCSC was adapted to the IEEE 9-bus system as one of the interconnected transmission networks that are increasingly spreading to improve service reliability, reduce reserve capacity, and enhance
system efficiency. In addition, IEEE 39-bus system, as a large interconnected system, is also examined to generalize the TCSC impact on different interconnected systems. To determine the precise impact,
the impedance of the TCSC was calculated based on its practical design parameters. The impedance of the TCSC was examined as a function of transmission line impedance and ring angle. Both Mho and Quadrilateral distance relays were tested using the MATLAB/Simulink environment for different types of faults, fault locations, fault resistances, and ring angles for capacitive, inductive, and blocking modes of TCSC operation. In addition, distance relay performance was evaluated during power swing phenomenon in the presence of the TCSC. Simulation tests indicated the negative impacts of the TCSC on distance relay operation, which are not limited to over-reach and under-reach in faulty conditions but also to maloperation in dynamic disturbances that cause power swing phenomena on the protected line.