Quantitative multicomponent analysis is considered an analytical goal to save time and cost in analysis. Hence, this work aimed to provide sensitive and selective UV-spectrophotometric, chemometric manipulation, and ultra-performance LC (UPLC) methods for the determination of well-known coformulated antiemetics used in pregnancy, namely pyridoxine HCl (PYR), meclozine HCl, and cyclizine. The developed UV-spectrophotometric methods are dual wavelength in ratio spectra and first derivative of the ratio spectra with which PYR was determined selectively at 290.8 nm, whereas the other drugs in a ternary mixture were determined from their ratio spectra using a spectrum of PYR as a divisor in 0.1 M HCl. An ecofriendly partial least-squares regression chemometric method was applied to raw UV absorbance data for the determination of the ternary mixture in a 218-355 nm range using a three-factor, three-level design with water as the green solvent. A gradient UPLC method was developed and successfully resolved the ternary mixture within 5 min. Different ratios of water (adjusted to pH 3 with phosphoric acid) and methanol were delivered at 0.5 mL/min as the mobile phase into a Hypersil Gold C18 column (50 × 2.1 mm, 1.9 µm). The developed methods were successfully applied to different pharmaceutical formulations containing the aforementioned drugs and validated according to the International Conference on Harmonization guidelines. The results obtained were reproducible and reliable and can be applied for routine analysis and QC in laboratories.

Journal of Chromatographic science, 49: 1-7 (2011) IF: 1.078

Two chromatographic methods were developed, optimized and validated for simultaneous determination of calcipotriol monohydrate (CPM) and betamethasone dipropionate (BMD) in the presence of two dosage form additives named; butylated hydroxytoluene (BHT) and alpha-tocopherol (TOCO). The proposed methods were accurate, sensitive and specific. The first method based on using aluminum thin-layer chromatographic plates precoated with silica gel GF254 as a stationary phase and chloroform-ethyl acetate-toluene (5:5:3, by volume) as a developing system. This was followed by densitometric measurement of the separated bands at 264 nm. Whereas the second method is RP-HPLC where OnyxMonolithic C18® column was used with a gradient profile using methanol, water and acetic acid at flow rate 2.0 mL min-1. Detection was carried out at 264 nm. The methods were validated according to ICH guidelines. The specificity of the developed methods was investigated by analyzing the pharmaceutical dosage form. The validity of the proposed methods was assessed using the standard addition technique. The obtained results were statistically compared with those obtained by the official methods, showing no significant difference with respect to accuracy and precision at P = 0.05.

Two chromatographic methods were developed and validated for the simultaneous
determination of Mometasone furoate (MO) and Formoterol fumarate dihydrate (FOR). Combination
of MO and FOR is used for the treatment of asthma in patients suffering from reversible
obstructive airway disease. The first chromatographic method was based on using aluminum
TLC plates pre-coated with silica gel GF254 as the stationary phase and chloroform:ethyl acetate:
methanol:toluene:formic acid (5:2:2:2:0.1, by volume) as the mobile phase followed by densitometric
measurement of the separated bands at 233 nm. The second method is a high performance liquid
chromatographic method for the separation and determination of MO and FOR using reversed
phase C18 column with isocratic elution. The mobile phase composed of methanol: 0.5% ammonium
acetate pH adjusted with acetic acid (80:20, v/v) at a flow rate of 1.0 mL/min. Quantitation
was achieved with UV detection at 220 nm. The specificity of the developed methods was investigated
by analyzing the pharmaceutical dosage form. The validity of the proposed methods was
assessed using the standard addition technique. The obtained results were statistically compared
with those obtained by the reported methods, showing no significant difference with respect to accuracy
and precision at p = 0.05.