Publications

Export 78 results:
Sort by: Author Title Type [ Year (Desc)]
2017
Mohamed, A., B. Mostafa, M. Elsherbiny, and K. Abed, "Rheological characteristics of modified calcium grease with graphene nanosheets", • Fullerenes Nanotubes and Carbon Nanostructures , vol. 25, issue 6, 2017.
Mostafa, B. •, M. • Elsherbiny, A. * Mohamed, and • M. Abd-Rabou, "Tribological Properties of Graphene Nanosheets as an Additive in Calcium Grease", Journal of Dispersion Science and Technology, vol. 38, issue 10, 2017.
Kamel, B. M., Mohamed, El Sherbiny, M., and Abed, K.A., "Tribological properties of graphene nanosheets as an additive in calcium grease", Journal of Dispersion Science and Technology , vol. 38, issue 10, pp. 1495-1500, 2017.
2016
KM Khaled, D Röske, AE Abuelezz, and MG El-Sherbiny, "The influence of temperature and humidity on the sensitivity of torque transducers", Measurement, vol. 94, issue 12, pp. 186 - 200, 2016.
Kamel, B. M., A. Mohamed, E. M. Sherbiny, and K. A. Abed, "Rheology and thermal conductivity of calcium grease containing multi-walled carbon nanotube", Nanotubes and Carbon Nanostructures, vol. 24, issue 4, pp. 260 - 265, 2016.
M, B., A. Mohamed, E. M. Sherbiny, and K. A. Abed, "Tribological Behaviour of Calcium Grease Containing Carbon Nanotubes Additives", Industrial Lubrication and Tribology. , vol. 68, pp. 723 - 728, 2016.
2015
KM Khaled, D Röske, AE Abuelezz, and M. G. Elsherbiny, "Humidity and temperature effects on torque transducers, bridge calibration unit and amplifiers", Measurement, vol. 74, issue October, pp. 31-42, 2015.
2014
Zein, H., M El Sherbiny, M. Abd-Rabou, and M. El-Shazly, "Thinning and Spring back Prediction of Sheet Metal in the Deep Drawing Process ,J Mater & Design (2014) vol 53, pp. 797-808", Materials & Design, vol. 53: J Mater Design (2014), pp. 797-808, May 1, 2013, 2014. 2nd_paper.pdf
Hamed, S., and M. El-Sherbiny, "Error Separation in CMM Coordinate Metrology", Journal of Measurement Science and Instrumentation, vol. 5, issue 1, pp. 1, 2014.
Ibrahim Medany, M. Shazly, and M. G. El-Sherbiny, "Expert-Based-Computer Aided Design and Component Selection for Dust Collection Systems", International Journal For Scientific Research in Environmental Science, vol. 2, issue 1, pp. 14-28, 2014.
2013
Zein, H., M. El-Sherbiny, M. Abd-Rabou, and E. M. shazly, "Effect of Die Design Parameters on Thinning of Sheet Metal in the Deep Drawing Process, J. AJME,1 (2), 2013", American Journal of Mechanical Engineering and Automation, vol. 1, issue 2, 2013.
2012
El-Sherbiny, M. G., A. A. Khattab, and M. Kassab, "Design of a Deployment Mechanism for the Solar Array on a Small Satellite, J. AJME, 1(3), 2013", American Journal of Mechanical Engineering, vol. 1, issue 3, pp. 66-72, 2012.
El-Sherbiny M., Hegazy R., Ibrahim M., and A. A, "The influence of geometrical tolerances of Vickers indenter on the accuracy of measured hardness", International Journal of Metrology and Quality Engineering, vol. Vol. 3, No 1, 2012.
2011
Khaled K.M., Aggag G., Abuelezz A.E., and E. M.G., "The influence of misalignment on the uncertainty of vertical torque calibration machine", Mapan - Journal of Metrology Society of India, ISSN 9703950, vol. Vol 26, No 2, issue No 2, 2011.
2010
Hegazy, R., M. Ibrahim, A ABUELEZZ, and MG El-Sherbiny, "L’effet des erreurs géométriques de découpe sur l’exactitude et l’incertitude de dureté Vickers", CONGRÈS INTERNATIONAL DE MÉTROLOGIE, Paris, Sept, 2010.
Khaled K.M., Aggag G., Abuelezz A.E., and E. M.G., "Mechanical design of NIS new reference torque standard machine", 21st Conference on Measurement of Force, Mass and Torque Together with HARDMEKO 2010 and 2nd Meeting on Vibration Measurement, IMEKO TC3, TC5 and TC22 Conferences, 2010.
Khaled K.M., Aggag G., Abuelezz A.E., and E. M.G., "Performance evaluation of nis new reference torque standard machine", 21st Conference on Measurement of Force, Mass and Torque Together with HARDMEKO 2010 and 2nd Meeting on Vibration Measurement, IMEKO TC3, TC5 and TC22 Conferences, 2010.
2007
Khalifa A.F., Arafa M.H., and E. - S. M.G., "Numerical and experimental analysis of sloshing in rectangular tanks", Journal of Engineering and Applied Science, vol. Vol 54, , issue No 5, 2007.
2000
Shazly M., Abd-Rabou M., and E. - S. M, "Parametric design of railway wheel under drag braking conditions", Journal of Engineering and Applied Science, vol. Vol 47, , issue No 2, 2000.
1999
El-Shazly M.H., El-Sherbiny M., Matthews A., and L. A, "11. Analysis of a segmented die design approach to improving the performance of coated metal forming tools", Materials and Manufacturing Processes, vol. Vol 14, , issue No 2, 1999.
El-Shazly M.H., El-Sherbiny M., Matthews A., Leyland A., and R. M, "Effect of hard coating properties on substrate stresses under tribological loads", Materials and Manufacturing Processes, vol. Vol 14, , issue No 2, 1999.
El-Shazly M.H., El-Sherbiny M., Matthews A., and L. A, "Effect of substrate pretreatment on PVD TiN hard coating performance", Materials and Manufacturing Processes, vol. V 14, issue No 2, 1999.
1998
Abd-Rabou M.M., and E. - S. M.G., "Thermo elastic study on brake pads using FEA", Journal of Engineering and Applied Science, vol. 45, issue 5, 1998.
1997
Abd-Rabou M., El-Sherbiny M., and K. O., "Thermal Aspects of Disc Brakes for High Speed Trains", First World Tribology Congress, LONDON, U.K, Sept, 1997.
1995
El-Sayed A.A., E. - S. M.G., Abo-El-Ezz A.S., and A. G.A., "Friction and wear properties of polymeric composite materials for bearing applications", Wear, vol. 184, issue 1, 1995.
Tourism