1996- Ph.D., Mechanical Design and Production,Cairo University,Egypt.
1988- M.Sc., Mechanical Design and Production,Cairo University,Egypt.
1983- B.Sc., Mechanical Design and Production,Cairo University,Egypt.
Department of Mechanical Design and Production – Faculty of Engineering –Cairo University
at Faculty of Engineering – Cairo University from 2010 to 2015 and from 2017 to 2019
- Scientific Mission to Canada for 9 months starting from September 2006
- Research fellowship, Cairo University, 1989-1991
- Graduate Studies Scholarship, Cairo University, 1983-1988
- Undergraduate Studies Scholarship, Cairo University, 1978-1983
- Distinction Award in undergraduate studies, Cairo University, 1983
- 2005 -The Prize of distinguished Post Graduate Research From The Center for Advancement of Post – Graduate Studies and Researches in Engineering Sciences- faculty of Engineering – Cairo University
- 2005 – The Prize of the best Teaching staff of Mechanical Design and Production Department
- 1983 – Graduation from Mechanical Design andProductionDepartment-CairoUniversitywith distinguishing with honors degree
- Member in the syndicate of Egyptian Engineers
- Member in the Egyptian Human and Technology Development Association
- Member in "HEEP" Project concerned with the modernization of some post graduate courses ( ends at April 2006
)
RESEARCH AREA
Mechanics of Solids - Mechanics of Plastic Deformation - Analytical and Experimental Stress Analysis - Ductile failure - Metal forming - Sheet Metal Forming.
- Strength of Materials and Stress Analysis for 3rd semester mechanical and aeronautical engineering.
- Mechanical Engineering 3rd semester biomedical engineering.
- Structural Mechanics for 5th semester mechanical engineering.
- Mechanics of Solids and Theory of Plasticity for 8th semester mechanical engineering.
- Experimental Stress analysis for 10th semester mechanical engineering.
- Failure Analysis for 10th semester mechanical engineering.
- Mechanical Engineering drawing for 1st and 2nd semester.
- Mechanics of Elasticity and Plasticity for Post-graduates
RESEARCH EXPERIENCES
Concerning the problem of predicting the limit strains for stretched sheet metals using void growth models. Analytical techniques have been applied and a yield criterion model is developed to describe the plastic deformation of voided planar isotropic sheet metal.
Concerning the mechanics of deformation of buried flexible pipes. Theoretical model is developed to study the interaction between the buried pipe and the supporting soil. Experimental work (Photoelasticity) is carried out to verify the theoretical model.
Concerning the performing of mechanical tests on different types of pipes used in sanitary systems according ASTM standards. The stiffness factor, the average impact resistance and the bursting pressure are determined. The behavior of these pipes under static and impact loading is studied theoretically and experimentally.
- Participated with the solid mechanics group at the mechanical design and production department working in a collaboration project withTennesseeUniversityconcerning “Basic and Applied Studies towards the standardization of Plastic Pipes and Fittings”. Quarter annual reports have published. In addition quality assurance tests of both PVC and PE pipes as products of different Egyptian plastic companies have been carried out in solid mechanics laboratory.
- Participating as one of the instructors in “Stress Analysis Training Courses” for Engineers working in Abu-Zaabal Company for Engineering Industries, (July 1999)
- Participating as one of the instructors in “ Prevention and Analysis of Mechanical Failures Course” for Engineers working in Gulf Petroleum Company (Gupco), (May 2000)
- Participating as one of the instructors in “Stress Analysis Training Courses” for Engineers working in Asik Company, (December 2001)
- Participating as one of the instructors in “Rolling Theory" for a group of Engineers working in Dekhella Iron Company, (September 2002)
- Participating as one of the instructors in “Design of piping systems”, Workshop at AUC, December 2009.
Supervised Theses
ASSESSMENT OF PITTING CORROSION IN THIN WALLED PIPES”, Granted 2018.
Integration of Void Growth and Coalescence Criteria into a Finite Elements Software to Predict Ductile Fracture of Sheet Metal”,. Granted 2017.
LIMIT PRESSURES AND MOMENTS FOR HILLSIDE NOZZLES IN CYLINDRICAL VESSELS”, Granted 2017
Displacement Amplification using a Compliant Mechanism for Vibration Energy Harvesting”. Granted 2016.
Mechanical Performance of a New Dynamic Accumulator”, Granted 2015
" Modeling and Experimental Study of Centrifugally Cast Bi-metal Roll ". Granted 2015
Prediction of Fracture Strain Limit Curves for Stretched Sheet Metals using Ductile Fracture Criteria”,. Granted 2014
"Instability of pressurized conical pipes" Granted 2013
: " Creep of Rotating Disc" ,Granted in September 2009
“ Spring-Back Compensation and Bend Allowance Assessment in Die Design " Granted in January 2004 (with Prof. Dr. M.K. Bedewy and A. O. Nassef)
“Prediction of processing limits in Drawing and Extrusion Using Ductile Failure Criteria", Granted in September 2003 (with Prof. Dr. A.R. Ragab)
“Prediction of Forming Limit Curves for Kinematically Hardened Voided Sheet Metals”, Granted June 2001 (with Prof. Dr. A.R. Ragab)
., ”Activation and Modification of Hydraulic Press " (2010-2011) with Prof. A.R. Ragab.
., ”Modification of Hydraulic Press " (2009-2010) with Prof. A.R. Ragab.
., ”Design of Climbing Crane to Wind Tower " (2009-2010) with Prof. Mokhtar.
., ”Evaluation the formability of sheet metals using experimental methods" (2008-2009) with Prof. A.R. Ragab.
., ”Evaluation the formability of sheet metals using experimental methods" (2008-2009) with Prof. A.R. Ragab.
., ‘Evaluation the performance and modification of butterfly valve”, (2007-2008) with Prof. Dr. Seif Khorshid and Dr. Mohamed Salah.
., “Design and Construction of Educational Testing Machine”, (2004-2005)
., ”Evaluation the formability of sheet metals using experimental methods" (2002-2003)
., ‘Evaluation the performance of a hydraulically driven rolling machine”, (2001-2002) with Prof. Dr. A. R. Ragab and Dr. M. El-Gameel
., ”Evaluation the performance of a hydraulically driven rolling machine”, (2000-2001) with Prof. Dr. A. R. Ragab, Prof. Dr. S. Kasem and Dr. M. El-Gameel.
, “Evaluation and development of some spinal systems”, (1999-2000) with Prof. Dr. Seif Khorshid.
., “Evaluation the performance and development of some engineering products”, (1997-1998) with Prof. Dr. Seif Khorshid.
- The Investigations of the Fall-Down of The Paint Stacker Crane at GME- 6th October Plant, Egypt. (with Prof. M.M.Megahed, Prof. Ragaie Rashad and Dr. Sahour Sayed),-2018.
- Technical and Experimental Study about Jointing of "DuraFuse" Fittings of PE-100 with Pipes of PE-80 for Town Gas Company -(with Prof. Ragaei Rashad)- 2017
- Design of Three components force and moment sensor for aerodynamic testing at BUE Project (with Dr. Ragai Rashad ), 2017
- Technical Study and Finite Element Stress Analysis for Pipe and Gas Meter Supporting Systems for Egypt Gas Company (Prof. Ragaie M. Rashad and Eng. Ahmed Rabie)- 2015
- Mechanical testing of light post made of fiber-glass (with D. Rgaei Rashad) .-2011
- Failure Analysis of 600 mm Water Gate Valve (with Prof Yehia Shash and Dr. Ragaei Rashad) – 2011.
- Failure Analysis of Centrifugal Casting Mold for Pipe 1000 mm at NACAST, (with Dr. Ragaei Rashad, Dr. Mohamed Algameel and Eng. Mark Nasef) -2010.
- A Technical Report on Mechanical Properties of Seal and Guid Discs, Submitted to Gulf of Suez Petroleum Company (GUPCO) (with Dr. Ragai Rashad ), Center for Advancement of Postgraduate Studies and Research in Engineering Sciences, CAPSCU, Faculty of Engineering ,Cairo University,Egypt. January 2009
- A Technical Report on Mechanical and Metallurgical Properties of Stainless Steel Band Specimen, Submitted to Qarun Petroleum Company, ( with Prof. Dr. Mohamed M. Megahed and Prof. Dr. Ahmed El-Shaikh ), Center for Advancement of Postgraduate Studies
- A Technical Report on Determination of Acting Bending Moment by Means of Observed Curvature of the Nest Bolt of Soderberg Reduction Cell Used at Nag- Hammadi Smelter, ( with Prof. Dr. Mohamed M. Megahed), Center for Advancement of Postgraduate Studies and Research in Engineering Sciences, CAPSCU, Faculty of Engineering , Cairo University, Egypt, July 2001
- Quarter annual reports concerning basic and applied studies towards the standardization of plastic pipes and fittings, FRCU 830605 (Foreign Relations Coordination Unit ) 06/83-10/88, (with a group of teaching staff and engineers)
-
Project, “ Mechanical Testing of Pipes Used in Sanitary Systems”, 1983
(Last updated: Mon, 2020-01-13 15:47)